Wednesday, March 2, 2016

My IKEA Birthday Madness



How many times a day does a funny thought cross your mind, but you choose not to act on it because it is not what is expected? Whether it be that urge to do a cartwheel down an empty hallway, or the urge to stick a "stunt driver in training" bumper sticker on that vehicle that has one too many dents in it, I think we need to give in to these urges a little more often. And well... this year's birthday celebration comes to you from one of those passing thoughts that just hung on. 

Friday, February 12, 2016

Bulletin board makeover

Got some shabby old bulletin boards from my mom. Noticed that i could remove the frames with one screw. Threw some fabric in there.. And presto! Like new again!

Great place to hang the kiddos artwork!

Saturday, December 19, 2015

Wooden Wind-up Carousel

Well no project is without its difficulties: A leg falling off, getting too close with the clear coat, and various troubles with so-called permanent markers. Despite all of that I am quite pleased with the final project.

This is my first commissioned project! More than anything it was an excuse to buy new paint brushes, a project to occupy my time, and a chance to create something for a little -soon to be 5 year old - girl to cherish. I hope she appreciates this for years to come.

Saturday, September 19, 2015

Minions


Missle Laucher Minion Chalkboard Art
Well I seem to have run out of steam on this one... And yellow chalk so it isn't exactly complete but I think that is me, Queen of leaving one last detail unfinished or one bite of food on my plate. 

Usually the door bell and switch plates in the middle of my mural wall are my enemy so this time I decided to incorporate them.

I introduce you to my minions... 

Friday, April 17, 2015

Kitchen table bench with hidden storage.


Kitchen bench with storage to hold arts and crafts stuff.


Materials:
Bench, found second hand $50
Piano Hinge $10
Fibre Board 1/4" x 2' x 4' $8
Wood L Trim 9ft @2/bf = 18
Chain - Pulled from the junk drawer (and this is why I never throw anything away!) 

Time: About 1hr (unless you factor in the time looking for the right tools, getting the kids food and drinks and driving to the city to pick up the bench in the first place... then we are talking ALL DAY)

I had been on the hunt for new chairs for our kitchen table as our old ones we're falling apart and about to collapse. I am a huge fan of multi-purpose furniture so I decided to start looking for benches with storage but I didn't find anything I liked as they all looked like entryway benches. I then found two benches at an office furniture resale store for $50each. They were the perfect size to fit between the table legs and the fabric even had blues that match the kitchen walls.  I decided to convert them into  a storage bench like what you would see at a piano.

I used piano hinge and L Shaped trim to hold a fibreboard sheet along the bottom. I didn't get the edges as nicely fit as i would have liked but i had difficulty getting the bottom in because of the tapered shape of the legs. The second one i might put together in a different order to see if its easier. TRIAL AND ERROR IS MY M.O. ;)
I started by unscrewing the brackets that held the top on
Once I figured out the length of screw to use, I premarked with tape on my drill bit so I would be careful not to drill too far. I predrilled all the holes so that I would not split the trim.
I used a Jig Saw to cut the fibre board to approximate size. I had to make the square notches in the corners larger than this because the top of the legs were so much wider, I could not just drop it straight in. This wouldnt be an issue if you had an entirely square box to work with.
The trickiest part was getting the piano hinge screwed to the lid. I had to prop it up with bins the same width as the cushion and have it JUST resting along the edge. I shifted the cushion so it ligned up right at the edge along the back, and creating a little bit more of an overhang at the front so that it would be easier to lift the lid open.
I added chains to keep the lid from going too much past 90*. You want it to go just a little past 90 so that it will stay open if you need it too. I may eventually replace this chain with soft close hydraulics, but I am ever a a bargain hunter and am waiting to see some in the second hand reno store.
This is a great height for my son. He is too light to compress the foam in the cushion so he sits nice and high... me on the other hand, I sink right in. ;)
I will do the other bench next, and will let you know if I find any shortcuts or easier ways of doing this. I may just use the extra metal L brackets that were holding the cushion on this one and just do away with the wood trim on the next one and just bolt the fibre board directly to that. The wood trim looks much cleaner from underneath, but let's be honest... who is REALLY going to look under there anyways.

Saturday, March 7, 2015

Robin Williams Tribute - Chalkboard wall

With two little boys in the house, we watch a lot of cartoons and i am often reminded of what a legend we lost last year. This is my tribute to the late Robin Williams. ♡

Sunday, December 7, 2014

Gingerbread House in a Jar

Gingerbread House in a Jar
There was a gingerbread house competition as part of our towns 30th annual christmas tree lighting ceremony. As i now have 2 children under 2, I certainly didnt have the time or space to go big. So i had an idea to kind of recreate the ship in a bottle idea in a gingerbread house. This may just be the next "big" thing in gingerbread houses.


I took second place in the adult category and got a ribbon and a plaque, and a generous gift card to spend at General Quarter, one of our towns local shops.

All wired with battery operated lights.
Chocolate base
The first attempt at the walls... no so sucessful. Doubled the cooking time for the second batch, and while not highly edible they were certainly more sturdy.
Test fitting the pieces.